Ir a contenido
FAQ Shipping Contact
Husky Build-Out non-locking mounting plate installed on a truck bed liner, showing a secure, professional alternative to DIY toolbox lid mounts for mobile tool storage.
Husky Build-Out non-locking mounting plate installed on a truck bed liner, showing a secure, professional alternative to DIY toolbox lid mounts for mobile tool storage.
Metal pegboard tray on a perforated metal surface with a Husky tool in the background
Detail of the Husky Build-Out non-locking mount compatible specifically with toolboxes featuring red base latching clips.
Detail of the Husky Build-Out non-locking mount compatible specifically with toolboxes featuring red base latching clips.
Detail of the Husky Build-Out non-locking mount compatible specifically with toolboxes featuring red base latching clips.
Husky Build-Out non-locking mounting plate installed on a truck bed liner, showing a secure, professional alternative to DIY toolbox lid mounts for mobile tool storage.
Husky Build-Out non-locking mounting plate installed on a truck bed liner, showing a secure, professional alternative to DIY toolbox lid mounts for mobile tool storage.
Metal pegboard tray on a perforated metal surface with a Husky tool in the background
Detail of the Husky Build-Out non-locking mount compatible specifically with toolboxes featuring red base latching clips.
Detail of the Husky Build-Out non-locking mount compatible specifically with toolboxes featuring red base latching clips.
Detail of the Husky Build-Out non-locking mount compatible specifically with toolboxes featuring red base latching clips.
SKU H14R

Placa de montaje Husky Build-Out V2, calibre 14, para trabajo ligero

$60.00 - $60.00
$60.00
$60.00 - $60.00
$60.00
Disponibilidad:
en stock, listo para ser enviado

USA MADE

This item is designed and manufactured in the United States

Volume Pricing Available

Buying for a fleet or shop? We offer discounted shipping for bulk quantities. Send us a message for a personalized estimate.

Same Day Shipping

Orders received by 3pm PST ship same day M-F

Placa de montaje para construcción Husky

Descubra la placa de montaje Husky BuildOut , una solución ligera y discreta para organizar las cajas Husky BuildOut. Es sencilla, eficiente e ideal para quienes buscan un espacio de trabajo funcional y ordenado.

Beneficios de la placa de montaje Husky Build-Out

Esta placa de montaje garantiza una compatibilidad perfecta con los sistemas Husky. Además, con tan solo 1,27 cm de altura, ofrece un amplio espacio para herramientas. Úsela en su taller, garaje o vehículo para mantener su espacio ordenado fácilmente.

Características principales de la placa de montaje de desarrollo

  • Ligero y duradero : Fabricado en acero calibre 14, es perfecto para tareas ligeras. Como resultado, mantiene su configuración optimizada.
  • Diseño discreto : Solo 1,3 cm de alto. Esto maximiza el almacenamiento y garantiza la estabilidad.
  • Compatibilidad con Husky : diseñado para cajas Husky BuildOut, ofreciendo un ajuste seguro.
  • Fácil instalación : incluye espacio entre orificios para pernos de 16 pulgadas para un montaje rápido en montantes.
  • Artesanía de calidad : fabricado en el sur de California, por lo que obtiene una construcción confiable.

Presupuesto

  • Material : acero calibre 14
  • Dimensiones : 16,875 x 8,875 x 0,5 pulgadas
  • Tamaño del perno : 1/4 de pulgada
  • Capacidad de peso : se adapta a necesidades de trabajo liviano

Organice de manera eficiente con la placa de montaje

La placa de montaje Husky BuildOut combina simplicidad, resistencia y versatilidad. Además, su diseño discreto y fácil montaje la hacen ideal para los usuarios. Ya sea en el garaje, el taller o el vehículo, esta placa mantiene las herramientas organizadas sin esfuerzo. Por lo tanto, puede instalarla rápidamente y disfrutar de un espacio de trabajo limpio y a la medida de sus necesidades.

Pida su placa de montaje hoy mismo. Transforme su almacenamiento con un diseño minimalista y una funcionalidad robusta, creado para los sistemas Husky BuildOut. Experimente la diferencia de un espacio de trabajo bien organizado.

10-Gauge Steel (0.1345" | Thickness of Two Stacked Dimes)

  • Best For: Heavy-duty commercial wall mounts, shop workbenches, and massive modular tool stacks.
  • The Advantage: Extreme structural stiffness. This ultra-thick steel completely eliminates flexing, twisting, and tool rattling, making it the definitive choice for demanding daily job-site use.

12-Gauge Steel (0.1046" | Thickness of a Standard House Key)

  • Best For: Mobile service vans, enclosed trailers, and standard shop organization layouts.
  • The Advantage: The ultimate sweet spot between bulletproof strength and smart weight distribution. It handles constant over-the-road vibrations flawlessly without adding unnecessary bulk to your mobile rig.

14-Gauge Steel (0.0747" | Thickness of a Nickel)

  • Best For: Handheld battery organizers, small tool holsters, and lightweight shelf accessories.
  • The Advantage: High-tensile rigidity in a streamlined profile. It provides a rock-solid, permanent mount for smaller gear while keeping your workspace layout clean and low-profile.

8-Gauge Aluminum (0.1285" | Heavy-Duty Marine Grade)

  • Best For: Open truck beds, roof racks, exterior trailer sides, and high-moisture environments.
  • The Advantage: Maximum corrosion resistance with severe weight savings. Shaved pounds keep your mobile fuel efficiency optimized while remaining completely immune to rain, snow, and road salt oxidation.

10-Gauge Stainless Steel (0.1345" | Thickness of Two Stacked Dimes)

  • Best For: Premium exposed truck bed brackets, marine applications, high-end shop builds, and ultimate weather protection.
  • The Advantage: Combines the absolute, unyielding structural rigidity of our thickest 10-gauge plate with total lifetime corrosion resistance. It requires no paint or powder coat to stay 100% immune to rust, road salt, and harsh outdoor elements.

Note: Sheet metal gauge numbers run inversely—the lower the gauge number, the thicker and more rigid the actual metal substrate is.

We fabricate our mounting solutions and accessories using commercial-grade materials built for harsh environments. Choose the right finish for your build and review our care recommendations below:

Powder Coat Finish

  • What it is: An industrial-grade, chip-resistant finish applied over media-blasted metal. Ready to install out of the box and engineered to survive heavy daily tool friction.
  • Care: Low maintenance. Wipe down occasionally with a damp microfiber cloth to remove dust or workspace grime. Avoid using harsh chemical solvents or abrasive pads that could scratch the protective coating.

Raw Steel (Uncoated)

  • What it is: Shipped as premium raw American steel that has been completely precision laser-cut, sanded, and deburred. Perfect for fabrication shops or DIYers who want to weld the brackets directly to a rig or custom paint them.
  • Care: Requires immediate protection. Apply a clear coat or paint immediately after receiving to prevent surface oxidation (rust). Once coated, maintain with occasional wipe-downs using a dry cloth.

Painted Finish

  • What it is: A clean, cost-effective protective coating applied in-house. Perfect for everyday indoor workspace use or setups that won't see extreme, heavy-duty metal-on-metal abrasion.
  • Care: Moderate maintenance. Clean with a soft, damp cloth. Avoid harsh chemical solvents, degreasers, or abrasive scrubbing pads, as these can wear down or dull the paint over time. Minor touch-ups can easily be done with standard matching automotive or metal spray paint if scratched.

Aluminum (Uncoated)

  • What it is: Premium, lightweight raw American aluminum that has been precision laser-cut and deburred. It offers excellent natural corrosion resistance without adding unnecessary weight to your mobile rig or vehicle setup.
  • Care: Low maintenance. While it won't rust like raw steel, uncoated aluminum will naturally develop a dull patina over time when exposed to the elements. To maintain its bright, metallic shine, occasionally clean it with a dedicated aluminum cleaner or a light scotch-brite pad.

304 Stainless Steel

  • What it is: Premium marine-grade stainless steel that is 100% rust-proof for life. Perfect for extreme outdoor environments, saltwater exposure, or applications where zero maintenance is required.
  • Care: Virtually maintenance-free. Occasional rinses with fresh water in saltwater environments help maintain the pristine finish. No coating or paint needed—ever.

FAQ

What's the difference between metal types?
  • Mild Steel — our most common and go-to option: heavy, strong carbon steel that's affordable and versatile for heavy-duty applications (available in gauges like 10, 11, 12, 14).
  • Stainless Steel (like 304 or 316 grades): premium upgrade with excellent corrosion resistance — won't rust easily, even in wet, outdoor, or marine environments; durable with a shiny, attractive finish, but heavier and more expensive.
  • Aluminum (like 5052 alloy): lightweight (about 1/3 the weight of steel), naturally rust-resistant, easy to form, and great for weight-sensitive projects; excellent strength-to-weight ratio, ideal when you want no-rust performance without the heaviness of steel.
Which finish should I choose?
  • Raw Steel — bare metal, lowest cost, quickest; needs protection to prevent rust.
  • Powder Coat — durable textured black finish; excellent rust/chip resistance for long-term use.
  • Stainless and aluminum ship with natural mill finishes (no rust concern) and can be powder coated on request. Check product pages for exact availability by metal and gauge.
What do gauge numbers mean?

Gauge numbers measure the thickness of sheet steel. Lower numbers = thicker material. A higher gauge number means thinner steel.

How do I choose the right gauge for my project?
  • Choose thicker gauges (10 or 11) for heavy-duty strength, structural parts, or high-load applications. Example: Using the plate on a horizontal application such floor or dolly.
  • Choose thinner gauges (14) for lighter-weight parts, panels, or where cost matters more. Ideal for vertical applications suck as wall or bedside mount.
Why does gauge go backward (lower number = thicker)?
  • The gauge system originated from the number of draws needed to produce wire/sheet of that thickness. Fewer draws = thicker material = lower gauge number.