Placa de montaje Milwaukee Packout Dual de calibre 14, para trabajos livianos, paquete a granel de 25 piezas

ENVÍO GRATIS AL COMPRAR 25 PLATOS

(A 48 ESTADOS CONTINUOS)

• Acero crudo calibre 14 , listo para pintar.
• Recubierto de polvo negro texturizado para un acabado duradero que combina con la mayoría de los acabados de molduras.
• Acero inoxidable 304 de calibre 14 para aplicaciones marinas

10-Gauge Steel (0.1345" | Thickness of Two Stacked Dimes)

• Best For: Heavy-duty commercial wall mounts, shop workbenches, and massive modular tool stacks.
• The Advantage: Extreme structural stiffness. This ultra-thick steel completely eliminates flexing, twisting, and tool rattling, making it the definitive choice for demanding daily job-site use.

12-Gauge Steel (0.1046" | Thickness of a Standard House Key)

• Best For: Mobile service vans, enclosed trailers, and standard shop organization layouts.
• The Advantage: The ultimate sweet spot between bulletproof strength and smart weight distribution. It handles constant over-the-road vibrations flawlessly without adding unnecessary bulk to your mobile rig.

14-Gauge Steel (0.0747" | Thickness of a Nickel)

• Best For: Handheld battery organizers, small tool holsters, and lightweight shelf accessories.
• The Advantage: High-tensile rigidity in a streamlined profile. It provides a rock-solid, permanent mount for smaller gear while keeping your workspace layout clean and low-profile.

8-Gauge Aluminum (0.1285" | Heavy-Duty Marine Grade)

• Best For: Open truck beds, roof racks, exterior trailer sides, and high-moisture environments.
• The Advantage: Maximum corrosion resistance with severe weight savings. Shaved pounds keep your mobile fuel efficiency optimized while remaining completely immune to rain, snow, and road salt oxidation.

10-Gauge Stainless Steel (0.1345" | Thickness of Two Stacked Dimes)

• Best For: Premium exposed truck bed brackets, marine applications, high-end shop builds, and ultimate weather protection.
• The Advantage: Combines the absolute, unyielding structural rigidity of our thickest 10-gauge plate with total lifetime corrosion resistance. It requires no paint or powder coat to stay 100% immune to rust, road salt, and harsh outdoor elements.

Note: Sheet metal gauge numbers run inversely—the lower the gauge number, the thicker and more rigid the actual metal substrate is.

We fabricate our mounting solutions and accessories using commercial-grade materials built for harsh environments. Choose the right finish for your build and review our care recommendations below:

Powder Coat Finish

• What it is: An industrial-grade, chip-resistant finish applied over media-blasted metal. Ready to install out of the box and engineered to survive heavy daily tool friction.
• Care: Low maintenance. Wipe down occasionally with a damp microfiber cloth to remove dust or workspace grime. Avoid using harsh chemical solvents or abrasive pads that could scratch the protective coating.

Raw Steel (Uncoated)

• What it is: Shipped as premium raw American steel that has been completely precision laser-cut, sanded, and deburred. Perfect for fabrication shops or DIYers who want to weld the brackets directly to a rig or custom paint them.
• Care: Requires immediate protection. Apply a clear coat or paint immediately after receiving to prevent surface oxidation (rust). Once coated, maintain with occasional wipe-downs using a dry cloth.

Painted Finish

• What it is: A clean, cost-effective protective coating applied in-house. Perfect for everyday indoor workspace use or setups that won't see extreme, heavy-duty metal-on-metal abrasion.
• Care: Moderate maintenance. Clean with a soft, damp cloth. Avoid harsh chemical solvents, degreasers, or abrasive scrubbing pads, as these can wear down or dull the paint over time. Minor touch-ups can easily be done with standard matching automotive or metal spray paint if scratched.

Aluminum (Uncoated)

• What it is: Premium, lightweight raw American aluminum that has been precision laser-cut and deburred. It offers excellent natural corrosion resistance without adding unnecessary weight to your mobile rig or vehicle setup.
• Care: Low maintenance. While it won't rust like raw steel, uncoated aluminum will naturally develop a dull patina over time when exposed to the elements. To maintain its bright, metallic shine, occasionally clean it with a dedicated aluminum cleaner or a light scotch-brite pad.

304 Stainless Steel

• What it is: Premium marine-grade stainless steel that is 100% rust-proof for life. Perfect for extreme outdoor environments, saltwater exposure, or applications where zero maintenance is required.
• Care: Virtually maintenance-free. Occasional rinses with fresh water in saltwater environments help maintain the pristine finish. No coating or paint needed—ever.