California State Metal Wall Art

The Ultimate Statement Piece for the Golden State

Bring the rich heritage of California into your home with the BOCO Custom California State Metal Wall Art. Precision-cut from two separate layers of heavy 14-gauge American steel, this custom shield captures the spirit of the West Coast in a compact yet bold 14-inch display. Our signature bi-layered construction offers incredible 3D depth and industrial durability that mass-produced tin signs simply can't match.

10-Gauge Steel (0.1345" | Thickness of Two Stacked Dimes)

• Best For: Heavy-duty commercial wall mounts, shop workbenches, and massive modular tool stacks.
• The Advantage: Extreme structural stiffness. This ultra-thick steel completely eliminates flexing, twisting, and tool rattling, making it the definitive choice for demanding daily job-site use.

12-Gauge Steel (0.1046" | Thickness of a Standard House Key)

• Best For: Mobile service vans, enclosed trailers, and standard shop organization layouts.
• The Advantage: The ultimate sweet spot between bulletproof strength and smart weight distribution. It handles constant over-the-road vibrations flawlessly without adding unnecessary bulk to your mobile rig.

14-Gauge Steel (0.0747" | Thickness of a Nickel)

• Best For: Handheld battery organizers, small tool holsters, and lightweight shelf accessories.
• The Advantage: High-tensile rigidity in a streamlined profile. It provides a rock-solid, permanent mount for smaller gear while keeping your workspace layout clean and low-profile.

8-Gauge Aluminum (0.1285" | Heavy-Duty Marine Grade)

• Best For: Open truck beds, roof racks, exterior trailer sides, and high-moisture environments.
• The Advantage: Maximum corrosion resistance with severe weight savings. Shaved pounds keep your mobile fuel efficiency optimized while remaining completely immune to rain, snow, and road salt oxidation.

10-Gauge Stainless Steel (0.1345" | Thickness of Two Stacked Dimes)

• Best For: Premium exposed truck bed brackets, marine applications, high-end shop builds, and ultimate weather protection.
• The Advantage: Combines the absolute, unyielding structural rigidity of our thickest 10-gauge plate with total lifetime corrosion resistance. It requires no paint or powder coat to stay 100% immune to rust, road salt, and harsh outdoor elements.

Note: Sheet metal gauge numbers run inversely—the lower the gauge number, the thicker and more rigid the actual metal substrate is.

We fabricate our mounting solutions and accessories using commercial-grade materials built for harsh environments. Choose the right finish for your build and review our care recommendations below:

Powder Coat Finish

• What it is: An industrial-grade, chip-resistant finish applied over media-blasted metal. Ready to install out of the box and engineered to survive heavy daily tool friction.
• Care: Low maintenance. Wipe down occasionally with a damp microfiber cloth to remove dust or workspace grime. Avoid using harsh chemical solvents or abrasive pads that could scratch the protective coating.

Raw Steel (Uncoated)

• What it is: Shipped as premium raw American steel that has been completely precision laser-cut, sanded, and deburred. Perfect for fabrication shops or DIYers who want to weld the brackets directly to a rig or custom paint them.
• Care: Requires immediate protection. Apply a clear coat or paint immediately after receiving to prevent surface oxidation (rust). Once coated, maintain with occasional wipe-downs using a dry cloth.

Painted Finish

• What it is: A clean, cost-effective protective coating applied in-house. Perfect for everyday indoor workspace use or setups that won't see extreme, heavy-duty metal-on-metal abrasion.
• Care: Moderate maintenance. Clean with a soft, damp cloth. Avoid harsh chemical solvents, degreasers, or abrasive scrubbing pads, as these can wear down or dull the paint over time. Minor touch-ups can easily be done with standard matching automotive or metal spray paint if scratched.

Aluminum (Uncoated)

• What it is: Premium, lightweight raw American aluminum that has been precision laser-cut and deburred. It offers excellent natural corrosion resistance without adding unnecessary weight to your mobile rig or vehicle setup.
• Care: Low maintenance. While it won't rust like raw steel, uncoated aluminum will naturally develop a dull patina over time when exposed to the elements. To maintain its bright, metallic shine, occasionally clean it with a dedicated aluminum cleaner or a light scotch-brite pad.

304 Stainless Steel

• What it is: Premium marine-grade stainless steel that is 100% rust-proof for life. Perfect for extreme outdoor environments, saltwater exposure, or applications where zero maintenance is required.
• Care: Virtually maintenance-free. Occasional rinses with fresh water in saltwater environments help maintain the pristine finish. No coating or paint needed—ever.