Milwaukee Packout Accessory Wall Mount – 14-Gauge Steel

A 14-gauge steel wall mount that gives Milwaukee® PACKOUT™ accessories a permanent home on shop walls, van shelving or trailer doors. It works with PACKOUT paper towel holders, battery racks, storage bins, wall hooks and broom clips. Laser-cut in the USA with a low-profile 0.5-inch height.

Load ratings assume attachment to a solid structural framing member (stud, van shelving rib or equivalent) with appropriate hardware. Most PACKOUT accessories weigh 0.5 to 8 lb loaded.

Where it mounts: shop walls, van shelving and trailer doors with a solid framing member behind them.

Installation

1. Locate your stud or structural framing member. Both holes land on the same vertical support.
2. Hold the mount against the wall, confirm it is level and mark through the top and bottom slots.
3. Drive the fasteners snug, using the slot width to fine-tune side-to-side position (hardware not included).
4. Align the PACKOUT click-rail tab with the mount and press firmly until it locks.

Need a different hole pattern or size? We make custom mounts. Contact us with your requirements.

Why steel instead of plastic

• No cracking: plastic mounts can crack under weight or in extreme cold. Steel handles the vibration of a work van and a busy shop.
• Low profile: it saves space on the wall.
• Finish your way: choose uncoated to weld or paint it yourself, or painted or powder coated black for a ready-to-use look.

Frequently Asked Questions

What can I mount on it?
Milwaukee PACKOUT paper towel holders, battery racks, storage bins, wall hooks and broom clips.

What weight can it hold?
25 lb on a wall mount, attached to a solid framing member. Ratings assume appropriate hardware.

Can I mount it to drywall?
Only where a stud or other solid framing member is behind it. Substrate condition and fastener choice are the installer's responsibility.

Is mounting hardware included?
No. Mounting surfaces vary, so choosing the correct hardware for the installation is up to the end user or installer.

How long until it ships?
In-stock items ship within 1–2 business days. Made-to-order items ship in 1–2 weeks.

Shipping, returns and warranty: see our shipping policy, returns policy and warranty.

Made in the USA — BOCO Custom LLC. Milwaukee® and PACKOUT™ are trademarks of their respective owners. BOCO Custom LLC is not affiliated with or endorsed by them; brand names are used only to describe compatibility.

10-Gauge Mild Steel (0.1345" | A Little Over 1/8 Inch)

• Best For: Our Heavy-Duty plates: vehicle floors, truck beds, shop workbenches, and heavy modular tool stacks.
• The Advantage: Our stiffest steel. The extra thickness resists flexing, twisting, and rattling under heavy loads and daily job-site use, and it carries the highest load ratings we publish.

12-Gauge Mild Steel (0.1046" | About Two Stacked Dimes)

• Best For: Locking mounts for Husky Build-Out, Bauer, and DEWALT DXL, plus service vans, enclosed trailers, and standard shop layouts.
• The Advantage: A strong middle ground between strength and weight. It handles constant road vibration without adding unnecessary bulk to a mobile rig.

14-Gauge Mild Steel (0.0747" | About the Thickness of a Nickel)

• Best For: Light-Duty Packout plates, battery organizers, accessory mounts, and lightweight shelf accessories.
• The Advantage: A rigid, low-profile mount for lighter gear that keeps your layout clean and your weight down.

1/8-Inch Aluminum (0.125" | Light and Rust Resistant)

• Best For: Open truck beds, roof racks, exterior trailer sides, and wet or salty environments.
• The Advantage: Naturally rust resistant and about one third the weight of steel. It saves weight on a mobile rig and stands up to rain, snow, and road salt.

11-Gauge 304 Stainless Steel (About 0.125" | About 1/8 Inch)

• Best For: Exposed truck bed brackets, marine use, premium shop builds, and wet or corrosive environments.
• The Advantage: Strong, rigid 304 stainless that resists rust without paint or powder coat, even in road salt and harsh outdoor conditions. Available on select plates, made to order.

Note: Sheet metal gauge numbers run inversely. The lower the gauge number, the thicker and more rigid the metal.

We fabricate our mounting solutions and accessories from mild steel, aluminum, and 304 stainless steel, built for harsh job-site environments. Choose the right finish for your build and review our care recommendations below.

Uncoated Steel (Paint Ready)

• Overview: Shipped bare and untreated, straight from fabrication. Ideal for custom painting, powder coating, or welding into custom racks.
• Appearance: May show light mill scale, surface scuffs, or minor flash rust on delivery, which is normal for uncoated steel.
• Care & Maintenance: Uncoated steel will rust when exposed to moisture, humidity, or air. We strongly recommend cleaning and lightly sanding the surface, then applying paint, clear coat, or powder coat before installation.

Powder Coated

• Overview: A durable, baked-on powder coat finish that protects the steel against wear, corrosion, and UV exposure. Powder coat is made to order.
• Appearance: A smooth, uniform finish, textured black on most plates and red on select Packout plates, ready to install out of the box.
• Care & Maintenance: Clean with warm water, mild dish soap, and a soft microfiber cloth. Avoid solvents such as acetone or paint thinner, and avoid abrasive scrubbers, which can wear the coating. Touch up deep gouges or scratches promptly to protect the metal underneath.

Uncoated Aluminum

• Overview: A lightweight, naturally rust-resistant option, about one third the weight of steel. Ideal for open truck beds, work vans, and marine or wet environments.
• Appearance: Bare metal with a clean industrial look. Aluminum forms a thin protective oxide layer on its own. Light surface grain or manufacturing tool marks may be present.
• Care & Maintenance: Wash with automotive soap and water. Aluminum may dull or develop a light oxidation over time, which is normal. To restore the shine, use a standard aluminum polish.

Uncoated 304 Stainless Steel

• Overview: Strong and highly rust resistant, for exposed truck beds, marine use, and wet or corrosive environments. Available on select plates, made to order.
• Appearance: A clean, bare metal finish that needs no paint or coating.
• Care & Maintenance: Low maintenance. Clean with soapy water or a stainless steel cleaner to remove grease, road grime, and fingerprints. Avoid steel wool and chlorine-based cleaners, which can mark or pit the surface.

What is Proposition 65?

Proposition 65 (officially the Safe Drinking Water and Toxic Enforcement Act of 1986) is a California law. It requires businesses to warn California consumers if a product can expose them to chemicals that the State of California lists as causing cancer, birth defects, or other reproductive harm.

These warnings are required even when a chemical is present in very small amounts that may not pose a significant health risk.

California Proposition 65 Warning

⚠️ WARNING: Cancer and Reproductive Harm. Products sold on this website can expose you to chemicals including lead, nickel, chromium (hexavalent compounds), titanium dioxide (airborne, unbound particles of respirable size), toluene, ethylbenzene, and formaldehyde, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

What our products are made from

Depending on the product, our items may include steel, aluminum, powder coat or paint (including spray paint), threadlocker, lithium grease, and plastics such as acrylic and acetal (Delrin). Metals and coatings can contain or release trace amounts of the chemicals above, especially during cutting, welding, sanding, or coating.

Why is this warning on my order?

BOCO Custom LLC ships products nationwide, so we include this warning to comply with California law. A Proposition 65 warning does not mean a product is unsafe or defective. It means a product may contain a trace amount of a listed chemical. We provide this information so you can make an informed purchase.